Hi Team, We have experiencing some problems with this APs. Let's see if you can add some light. We connect the AP to the network with Internet access and connect to the AP through the SSID Provisioned, after that we configure the WLC with static IP a...
Hi, We are facing some strange behaviuor regarding the txpower of C9120AXI-E power, i will show you some outputs (I sanitized the output for privacity reasons), this is the output of show ap dot11 24Ghz summary:AP1 MACXXXX 0 Enabled Up 20 *1/7 (12 dB...
Hi team, Maybe I'm missing something but I have the following situation with captive portal (may be cannot be achieved). I deployed 1 SSID (this behaviour happens in 9K8 and Meraki), this SSID it's type captive portal (in ISE), so the user is redirec...
Hi Team, We are experiencing weird behaviour with WLC9K8 and AP9K with some devices, exactly Android 10 Devices (doesn't matter which device model, we tried with Samsung and Xiaomi with same result). The issue:When those devices try to join to SSID ...
Hi Team, We have this situation in our deployment. 2 Differents Portals on ISE (each one in 1 SSID) a. Guest Portalb. Contractor Portal In authoritzation rules: a. Rule for redirect matching Guest SSID Guest and redirect to Guest Portal, then a Ru...
Hi,Well it's easy the schema. Plain switch with one SVI. This SVI it's the GW to the Computer and WLC. Also router with internet. The EWC get the IP vía DHCP. We define IP statically and save. Reboot the AP, disconnect the router and the AP isn't pi...
Hi Team, Sorry for my late response. I attach the capture about power supplied, as you can see the switch looks likes is offering 30W but the AP is only getting 15.4W, how can we force the 30W? Thank you!
Hi, From the AP point of View: This devices are connected to WS-C2960S-48PS-L, I request a "show power inline" because i don't have direct access to the final devices. Apreciate your effort!
Hi Jurgens: Please, see the attached below, as you can see are saying "Configured" where is this value configured? I cannot see in my configuration, as per power looks like is using 30W. Radio Info Summary:=======================Radio: 2.4GHzCarrier ...
