Hi guys, How are you doing? We got the following devices and components on our platform. CUCM 12.5, CUBE 03.16.04b CUCM - SIP - CUBE - SIP - ITSP In first place outgoing calls with no audio and after 20 seconds call is disconnected, then we enabled M...
Hi everybody, I have the following scenario: IP Phones (7821) - CME --- (SIP Trunk)---- PSTN. The outgoing calls are well, no problems with that. But in the incoming calls in first case (With rel100 enabled) doesnt establish calls. Ok, in SIP-UA I ha...
Hello!
I have the following issue:
When user correctly login on him personal directory, he try search a contact in him pd and phone returned a "PD error".
CUCM 11.5, Devices 8841, 8845, 8851 and so on.
I Appreciate your help!
Hi, Mohhamed. Thankyou for your recommendations, the behavior in the negotiation changes, but the behiavor in the call is the same. (Disconnected after 20 seconds with both way audio). in logs I can see that call never connects correctly between CUBE...
Hi Anika, this is that you need. https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html
Hi, What is following things? interface GigabitEthernet0/0/1ip address X.X.X.X X.X.X.Xnegotiation auto Is It a ASR interface? Because you need a hearthbeat/keep-alive interfaces on both sides.