About c-peter.ziobrzynski@charter.co

c-peter.ziobrzynski@charter.co · 04-08-2019

We follow UCS best practice and use iSCSI booting for all our b200 blades and c2xx servers. This works great as we can boot any profile on any B200 and boot iSCSI LUNs follow the profile. We use static target settings for the boot LUNs pointing to th...

c-peter.ziobrzynski@charter.co · 11-03-2017

Frequently I find myself looking at the service profile association FSM output that is stuck for long time at particular step. I would like to be able to look at finer details of the SP association with the server. I have syslog output set at debug ...

c-peter.ziobrzynski@charter.co · 04-16-2019

1. check LUN masking on the storage side - your initiators should be there.2. see that your array sees the initiators logging into the array while you try to bootThe details depend on your array.

c-peter.ziobrzynski@charter.co · 04-09-2019

Thanks for the pointer to the RFC2132. It describes the option 43 briefly and explains that vendors must define their own sub options and their semantics so when the DHCP server responds with them they comply to what vendor (in this case Cisco) need...

c-peter.ziobrzynski@charter.co · 11-03-2017

Super! This is what I was looking for. Thanks Wes! small correction: the command to get local-mgmt prompt is: connect local Now I assume that this tail output is just a circular log that is not kept on the FI - if only we could send it to syslog some...

Member Since	‎10-12-2017 01:52 PM
Date Last Visited	‎03-21-2021 02:25 PM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

dynamic iSCSI target discovery for ucs blades

how to monitor service profile association

Re: Troubleshooting iSCSI boot from UCS server... should be but not?

Re: dynamic iSCSI target discovery for ucs blades

Re: how to monitor service profile association