rhogh

Hi,Tried every possible combination for setting the mask using ppp ipcp mask, however it made no dif...

Hi,I'm trying to do IOS-to-IOS L2TP multilink to incease the throughput of DSL by using multiple lin...

Forgot you were running dhcp, 1st acl entry should be ...access-list 150 permit udp any any eq 68

Hi,If you only have one internal IP requiring a lot of ports to be forwarded, you could use the NAT ...

I have an 877W with 12.4(15)T8 running a pretty standard config where inf Vlan1 and Dot11Radio0 brid...

I just need a simple Tcl script (service) that when applied to a dial-peer will send a radius auth u...

Hi,Thanks for the info. Just want to clarify that MPLS MTU = IP MTU + LABELSIf ip mtu =1500 and 2 la...

Hi All,I'd like some clarification on MTUs and how they are affected by MPLS. This is my current und...

Hi,Part of an MPLS network I'm designing has to cross over a public IP network that does not provide...