Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We receive conflicting stories that Cisco Security Managet does not support IPS whist Cisco website indicated that it does. Please confirm. http://www.cisco.com/en/US/products/ps6498/prod_bulletin0900aecd803ffd79.htmlTIA.
We need help.- Need to upgrade 30 sensors from IDS4.1.5.S204 to V5x. - Upon applying IPS-K9-maj-5.0-1-S149.rpm.pkg the upgrade failed with the following error:component "signatureDefinition" and the instance "sig0"/signatures/[sig-id=2001,subsig-id=1...
After disabling a signature, the job to deploy the change returns with the following error message in VMS MC 2.3 . Please advise how to fix this problem.Sensor1: DeployStarting to Deploy...An EditConfigDelta request sent for all the changed compone...
Have you encountered this strange behaviour on VMS MC 2.3? We just finished upgrading to VMS 2.3 and notifications or email send from this server go to never never land. When testing Telnet to mail server on port 25, we got "Could not open a connect...
All our IDS 4x and 5x are receiving traffic, but when loading Events from Security Monitor, we only get a screen with row, column etc but no data.Connection status shows active on all sensors.Any ideas, what is causing this and your advice on how to ...
Other vensors have already produced the signatures for Blackworm (Nyxem.E, Blackmal.E, MyWife, Tearec).Do Cisco have an update as Feb 3 is the troublesome date?Simone.
Check this discussion as it might be related to your issue.http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Intrusion%20Prevention%20Systems/IDS&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd9dd10
The interface has already been assigned to Group 0, This sensor is still active and still sniffing traffic. It is VMS MC that is complaining. Your help is appreciated.
