Hi,
I have old Cisco ASR 1002 and I want to run CGN but not sure if required licenses.
it's running Ipbase tech package and the ip nat mode CGN is not there.
Any help.
Hello,
Please help me because I have a serious problem that I don't know the cause of it yet. I have a general enterprise network with Collapse Core Design where clients connected on access switches are not able to get IP addresses through DHCP from ...
Dear Gents,
We have two Cisco 9606 configured in SVL and working fine for two years. Now the company wants to move all network infrastructure to a new building, and we have to move this SVL. I would like to know if there any recommendations or best p...
Hi Experts,
Actually, I don't have much experience in UCS and I just have a request to upgrade the memory in one of the UCS servers, My company needs to purchase Cisco UCS-MR-X64G2RW to have 64GB DIMM however, the product description is saying its 6...
Hello experts,
I have a customer who is planning to setup a new pair of WLCs (9800-40) and about 260 APs. Furthermore, 1 xDNAC & 1xISE appliances have been also ordered with Wireless devices.
Now, I'm a bit confused about this and I don't kno...
Hello,
Reloading Standby Core switch didn't solve the issue, and also matching the same ether-channel load-balance algorithm between access & core didn't make any effect.
I also tried to disable BUM Opt (no svl l2-bum optimization) and same issue...
Hello,
Tomorrow we can have a change request and I will try that. Next, I'm going to reload the standby box if that didn't fix the issue.
If the reload also didn't make effect, then We're going for an upgrade as a last resort.
Thanks
Kind R...
Hi,
here is the output on SVL links on both Core SW and on C9300 Uplinks.
Core C9600============
show controllers ethernet-controller twe1/2/0/47 (1st SVL link on Active Core SW)Transmit TwentyFiveGigE1/2/0/47 Receive179759960929 Total bytes 405031...
In fact, TAC team mentioned the SW forwarding queue drops are so small and not related. by the way we have two twentyfive Gig links SVL so total of 50 Gigs on the SVL and the server is connected to both core SWs (2 x 10G) links on each Core.
I left...
