Hi Team, I'm trying to print from a Host (Windows 10) located in a Wifi Subnet (internal) to a wired printer located in the internal network.It's happening with all the printers and hosts.- The wireless architecture use CAPWAP to communicate the WAP...
Guys, I'm wondering if backups of entire nodes of Cisco ISE 2.4 could be enabled on a DR site using vmware Site Recovery Manager (SRM). I'm sure this is not possible but I haven't found any reference of this topic on Cisco documentation. Cisco ISE do...
Guys, I just upload the Mobility Express image to my Cisco WAP 2802i, After complete the Wizard I can't connect the WAP, not even by Wifi or wired. Notice that I have not configured DHCP Server due to I pretend to use the WAP in a Standalone mode a...
Guys, Few days ago our Primary ISP had an issue in one NIC of its Core Routers. Due to that we started receiving packet loss (50%) and VPN point-to-point tunnels bouncing. In our environment the solution was shutdown MANUALLY the interface (which is...
Guys, I have checked and it seems the WLC model 3504 does not have a Web Authentication bundle to download.What can I do if I would like the customize my Web-auth page for Web users, Could I use others "Wireless Lan Controller Web Authentication Bund...
Hi guys, I'm agree with some of the points, but there are two things here:1.- DRsite does not have internet access. Smart license wouldn't work.2.- We run an Emergency Test every year, in that case we isolate the DR site environment form our Main DC ...
Guys, You have brought in very interesting points of view, but let me explain why I'm asking for this compatibility between Cisco ISE and vmware SRM. Here is the thing.We currently have 2 nodes PAM/PSN running in our network. The entire wired/wireles...
Guys, I got it !!! Here is the thing.I want to have the DHCP externally just for "Wireless Users".I also want to provide statics IPs to the WLC and the WAP attached.When you do NOT configure an "INTERNAL DHCP Server" in the WLC first configuration w...
I also want to add that the WAP converted into a WLC has the LED state ALTERNATING BETWEEN GREEN AND RED, which means "Discovery/join process in progress". Does anybody have an idea what is happening here ? thank you,
