About GeorgeSimos

GeorgeSimos · 03-16-2015

Hello, We have purchased 2 Cisco UCS C220-M3 rack mounted servers (Single Processor) that have a dual port I350 LOM. We also purchased two Intel I350 Quad Port NICs to expand the available ports on each server from 2 to 6. The problem we are facing i...

GeorgeSimos · 12-07-2015

Hi Walter, Thanks for replying, I'm aware of this table and ofcourse is true what I stated above and in the initial post. The issue is that if the i350 isn't branded from Cisco with the specific Part Number (UCSC-PCIE-IRJ45) then you can't use it si...

GeorgeSimos · 12-07-2015

Hi to all, I'm posting this because I have finally confirmed my initial thought about Cisco Servers accepting only Cisco Branded NICs. At least for the case of i350 Quad Port NICs this is the case, we replaced the Intel ones with the same Cisco Brand...

GeorgeSimos · 03-17-2015

Hi Shawn, At least I'm not the only one having the same problem!You are trying to use the cards with the LOMs enabled?Which screen are you referring to in the first paragraph of your message?Mine sits in BIOS POST for about 10 minutes and then resets...

Member Since	‎03-16-2015 06:33 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	4

User Statistics

User Activity

Cisco UCS C220-M3 Server doesn't boot after adding Intel I350 Quad Port NIC

Hi Walter,

Hi to all,

Hi Shawn, At least I'm not