About ppenmeth

ppenmeth · 11-11-2016

Version NumberComments1.0Initial VersionWorkflow Name:Add_VMAX_Storage_as_VMFS_Datastore_to_ESXi_Cluster_on_Vblock_7XXDescription: This workflow provisions a new VMFS Datastore (FC) to ESXi Cluster carving the storage from VMAX storage array running...

ppenmeth · 11-11-2016

Version NumberComments1.0Initial VersionWorkflow Name:Deploy_ESXi_Host_On_Vblock_7XXDescription: This workflow provisions ESXi Host booting from SAN and Integrates with vCenter Server, UCS Manager and MDS Switches and EMC Solutions Enabler for VMAX ...

ppenmeth · 10-06-2014

Version NumberComments1.0Initial Version2.0Uploaded newer version of workflow which is validated on UCS Director 5.2 release (Note: If workflow version 1.0 is already configured on UCS Director 5.1, it should work fine even after upgrading the UCS Di...

ppenmeth · 10-06-2014

Version NumberComments1.0Initial Version2.0Uploaded newer version of workflow which is validated on UCS Director 5.2 release (Note: If workflow version 1.0 is already configured on UCS Director 5.1, it should work fine even after upgrading the UCS Di...

ppenmeth · 10-06-2014

Version NumberComments1.0Initial Version2.0Uploaded newer version of workflow which is validated on UCS Director 5.2 release (Note: If workflow version 1.0 is already configured on UCS Director 5.1, it should work fine even after upgrading the UCS Di...

ppenmeth · 10-05-2017

Hi Benjamin, The Launch VM Client is tied to IP Address of the VM and it is dynamically fetched during the launch. If the IP is different since it is behind the firewall, then it will not work because of the way it was implemented.User need to use di...

ppenmeth · 10-03-2017

Try the attached workflow. It has a custom task which converts the UCS VLAN to Multi VLAN identity to add the created VLAN to VLAN group.

ppenmeth · 10-02-2017

The output of previous task can be mapped to next task only within a Workflow only through Workflow Designer. The output of a workflow task cannot be used as a $ variable within another Custom task.Because of this reason you are getting a Java script...

ppenmeth · 09-12-2017

Hi Albert,UCS Director integration with APIC is over HTTP(Port 80) or HTTPS (Port 443) protocol.UCS Director acts as a client and APIC controller acts as a server. (API provider)If only HTTPS is enabled on APIC controller, then you need to open port ...

ppenmeth · 09-07-2017

UCS Director is focused on Infrastructure automation while CloudCenter is on App layer.Both has integration with ACI and hence you can see some overlaps. CloudCenter will automate all the ACI constructs that are required for App deployment.UCS Direct...

Member Since	‎02-07-2014 03:21 PM
Date Last Visited	‎10-31-2017 07:02 PM
Posts	29
Total Helpful Votes Received	16

User Statistics

User Activity

Add VMAX Storage as VMFS Datastore (FC) to ESXi Cluster on Vblock 7XX

UCSD ESXi BareMetal Provisioning with SAN Boot from VMAX in Vblock 7XX

UCSD Create a new MaskingView for shared VMFS Datastore access on ESXi Cluster (Vblock 7XX with Vision IO)

UCSD Add a new VMFS Datastore (FC) to ESXi Cluster on Vblock 7XX with Vision IO

UCSD ESXi BareMetal Provisioning with SAN Boot and N1Kv Workkflow on Vblock 7XX with Vision IO

Re: Launch VM client from SCVMM cloud

Re: create vlan in UCS and add to vlan group ( uplink)

Re: output from task1 not readable in task2

Re: UCSD APIC integration - Firewall between platforms

Re: UCSD or CloudCenter for ACI Integration