Please help!!!I have site-to-site IPSec tunnel, PIX PDM says the tunnel is up, but I have no access to private LANs, no icmp, etc..Tunnel in question is: 10.10.10.0/24 (pix) 10.98.28.0/23 (router)Attached are my configs, and d...
I have multiple vpns at my remote sites, they are all using GRE Tunnel to terminate from router-to-router.The cryptos are using my serial0 interface. (hub site).I want to incorporate a remote site that has a PIX506E, using IPSec.Question: Can I use b...
You got it. Create DMZ VLAN, and assign the ports coming from the ISP connections.Just leave the VLAN with an un-assigned IP address. Also, you would want to put your Firewall's Outside Public connection into this VLAN.btw, lol at the scribbles, you ...
Well.. you're forgetting your edge routers, you should have a router connected to each of your ISP's. Also, what about a firewall?Usually you have a DMZ VLAN setup, in that case you connect your two ISP edge routers to the DMZ VLAN, which can be on t...
