Hello all I have one 2921, with HWIC-D-9ESW, and I am seeing this error on logs: esw_dtc_ltc4258_reg_write : s2w timed out on unit 0 reg 0x18 data 0x22S2W Error IIR 0x0006 ISR 0x8000esw_dtc_ltc4258_reg_write : s2w timed out on unit 0 reg 0x18 data 0x...

Hi forum members I have the following scenario: SIP PBX  <--> UC540 <--> SIP trunk to service provider. The UC540 has the phones with numbers 100 to 105 registered. The PBX has the 7XX numbers. To the PBX, the following dial-peer is used: dial-peer v...

Hi alldoes someone knows if it's possible to connect two FXS ports or two FXO ports?I read about connecting two FXSs at http://www.cisco.com/en/US/tech/tk652/tk701/technologies_configuration_example09186a00800afd65.shtml#contrunk_design , using no si...