Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About kfolkman
Stats
Member since
05-22-2003
15
Posts
0
Helpful
0
Solutions
08-10-2011
Shane, contact me offline at kfolkman@gmail.com, and I'll share some
information with you.Kevin
08-05-2011
Shane,Smartnet or not, Cisco put non-conforming units out in the field,
and has a responsibility to ...
08-05-2011
Andrew, you've given that answer before, but the reality is much
different. I've seen three differen...
07-14-2010
This is exactly the same configuration I had on two differnet ASA5520
units, without all the sockets...
07-14-2010
Since we got a replacement unit that had all four DIMM sockets, we have
not contacted TAC, and proba...
06-24-2010
Kyle,We ended up returning the unit and getting another from a different
vendor that had four slots,...
04-26-2010
Well, it appears that the 5510 and 5520 have different buses. From what
I can see, the ASA5520 and A...
04-22-2010
Just bought an ASA5520, opened the box to upgrade the memory to 2 GB to
support 8.3, and discovered ...
04-21-2010
Just bought an ASA5520, opened the box to upgrade the memory to 2 GB to
support 8.3, and discovered ...
08-13-2009
An update from my side. The ROMMON has been upgraded with the
C2800NM_RM2.srec.124-13r.T6, after one...
08-13-2009
A 2811 router recently was powered down and up, and on reboot, would
only boot to ROMMON mode. We go...
Created by
kfolkman
in Other Network Architecture Subjects
07-03-2006
07-03-2006
Thanks,I was afraid that was the answer.Regards,Kevin Folkman
Created by
kfolkman
in Other Network Architecture Subjects
07-03-2006
07-03-2006
Is a WS-X5410 Gigabit Ethernet Module compatible with the copper GBIC
WS-G5483? I hope so, or the 55...
Created by
kfolkman
in Other Network Architecture Subjects
05-28-2003
05-28-2003
Game traffic in and out of his network. I hadn't thought about PAT. That
is probably the answer.Than...
Created by
kfolkman
in Other Network Architecture Subjects
05-22-2003
05-22-2003
I got asked by a customer about handing out random UDP ports through a
Cisco 831 router running DHCP...
Public Statistics
| Date Registered | 05-22-2003 01:13 PM |
| Date Last Visited | 08-18-2017 03:51 AM |
| Total Messages Posted | 15 |
