I would like to understand this term "QoS flavor". Does it has to do with the usage of class, policy-map, CWFQ", IP precedence or DSCP, to configure your QoS?A appreciate the explanation and I am sorry for the lack of knowledge about the term.
I want to stack one cat3750G-12S as master and a Cat3750G-24T as Slave. I went through the problem of use the proper SDM. As per Cisco recomendation both switches needs to be in aggregator mode. But there is no recomendation for both swicth to be run...
I have a pair of Cisco 831 routers, and I would like to implement a site to site VPN using static IP adresses provided by the ISPs on each side.I am looking for a configuration sample using IPSec (not GRE). I can use SEAL, it is OK, but I also will h...
I have three sites to interconnect and two SP. One SP connecting two site. The other SP connecting the three sites.I would like to use my router (7206) to route my company's traffic between the two SP if one of my site have a failure with one of the ...
I am looking for a configuration sample for a BGP router connecting to to providers with backup routes. I will have three sites interconnected to the two providers.If you have please let me know. I could not fin anything like that in the Cisco.comTha...
In my case one SP1 connects the three sites (A,B,C). The second SP2 only can be connected to two sites(A, B). My question is: In case SP2 fail to provide services to site A, Can I use SP1 to provide routes from A via C to B? What BGP features I have ...
Thanks for the feedback. In my case I wil be using the Xenpack-10GB-LR because I am under 10Km distance.Is there any special configuration or just configure the ports as DOT1Q trunk between the swicthes and it will work?
Thanks for your feedback.I agree with you on portfast. VMWARE request to disable STP or enable portfast in order to set up a trunk. As per my internal information VMWARE does not generate BPDU and does not run STP.The VMWARE server has 5 connections ...
