About walu

walu · 07-05-2007

Hello together,we have 2 adjacent router in area 0 on a LAN.On the first router we configured static-routes with redistribution into the OSPF.On second router we can see the network in the ospf external database but not in the routing table. see comm...

walu · 02-08-2007

Hello together,may someone could help us with this configuration scenario.We trying to establish a tunnel between two routers. On one router the tunnel interface and the tunnel source is in an vrf. The other side is not.Between this communication pa...

walu · 10-11-2006

Hi together,is it possible to set tags for network statements in OSPF configuration ?We already use tagging (with route-maps)for redistribution to other routing protocols. This works fine !But i?ve found no way to set an tag for OSPF network Statemen...

walu · 07-21-2005

Hello,i am searching for an particular ios command to set an serial interface to down if the router recognize that the line is flapping or that the line has errors (e.g crc).Is there a tracking command for the line or something else ?Thanks for all r...

walu · 03-14-2005

Hi Together,i like to use the "ppp chap hostname feature" for Authentication with an Username different than the Routers Name. The first implementations with just one dialer Interface works fine on a Cisco 836.But now i have the Problem that if a rou...

walu · 07-05-2007

HelloThanks for all responses. This conversation hepls us to fix this issue.We have change the static route entries from next hop to interface statement. And now the route is redistributed without a forwarded address in the LSA and therefor the route...

walu · 07-05-2007

Thanks for your fast response.I have check the configuration of both routers.It seems to be that the forward address is reachable via ospf from R01. see commands:R01#sh ip route 172.21.1.174Routing entry for 172.21.1.174/32 Known via "ospf 100", dis...

walu · 02-22-2007

Hello,there are no particular logs regarding this problem in the router ce-01.

walu · 09-01-2003

Hi ,we are using an Cisco 3640 Router with an 2 Port Pri Network Module and it seems that this command is not supported with this card.If there are no other possibilities i think that we should use an new card (VWIC-1MFT-G703). Did someone knew if th...

walu · 07-17-2003

Hi Milan,the 2 "missing" commands are in the configuration. I´ve missed it to insert it into the chat.It´s a 3550 Switch and we use IOS 12.1(11)We also tried to to use a simple ACL 125 (with permit icmp any any). But we we still see no matches for th...

Member Since	‎07-01-2002 01:56 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	45

User Statistics

User Activity

OSPF Routing Issue

Problems with vrf GRE Tunnel via IpSec GRE Tunnel

Tagging OSPF Network Statements ?

IOS Commands

PPP Authentication

Re: OSPF Routing Issue

Re: OSPF Routing Issue

Re: Problems with vrf GRE Tunnel via IpSec GRE Tunnel

Re: Configuring E1 Controller

Re: Deploying QoS for Catalyst 2550 Switch