About johnlhawley

johnlhawley · 02-14-2020

Been utilizing Ansible to automate Cisco switch configurations. But wondering if I don't have it optimized correctly. These are playbooks that modify port level configs and they take forever to run and often times max out the CPU on the switches, e...

johnlhawley · 09-25-2019

How would I go about pulling policy information through the ERS API's? I've got a working python script that I have successfully pulled the EndPoint profile by searching with the Endpoint ID MAC address:https://<ise admin fqdn>:9060/ers/config/endpo...

johnlhawley · 02-18-2020

Perhaps, but I believe STP problems are pretty rare in our environment. That's not the problem I'm trying to solve at the moment.

johnlhawley · 02-17-2020

Yes, have "no logging event link-status" on all the user connected ports. The trunk uplink we enable logging. I'm not sure this is the right forum for my question. I assume the issue lies with the way Ansible is doing its job. I believe there is a...

johnlhawley · 02-17-2020

ESISETEST4#sh proc cpu sort | ex 0.00CPU utilization for five seconds: 49%/1%; one minute: 68%; five minutes: 47%PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process192 28235 6333 4458 12.15% 19.43% 7.23% 2 SSH Process88 145281084 27797349 5226 4...

johnlhawley · 02-15-2020

Switch is running newest Cisco recommended: 15.2(4)E8.

johnlhawley · 09-25-2019

Thanks. Looks like I can get at least most of the info I was after with the Monitoring REST APIs.-John

Member Since	‎10-19-2017 01:00 PM
Date Last Visited	‎12-13-2023 12:23 AM
Posts	7

User Statistics

User Activity

Ansible spiking CPU on Cisco switches

Using ERS API to pull authc and authz policy details

Re: Ansible spiking CPU on Cisco switches

Re: Ansible spiking CPU on Cisco switches

Re: Ansible spiking CPU on Cisco switches

Re: Ansible spiking CPU on Cisco switches

Re: Using ERS API to pull authc and authz policy details