About SAMEHELSAMMAK

SAMEHELSAMMAK · 09-11-2022

dear alli have the isr4331 router i enabled the Application Visibility and see traffic data, i need to find the local ip address corresponding to the traffic getting out from routernetwork mapnim vdsl module -> port g0/0/0 -> switch -> clientshow can...

SAMEHELSAMMAK · 10-23-2021

dear alli configured the isr4331 as dns server and it forwards requests to OpenDNS servers it works correctly without any problems my question is the dns records or hosts on the router do i need to clear them manually at specific periods or will the...

SAMEHELSAMMAK · 10-06-2021

dear alli have ZBF configured and running but i want it also to block websites like : ssl-google-analytics.l.google.com how can i do that ?i tried to add it but it only accepts ip address not url. Cisco IOS XE Software, Version 17.06.01asecurityk9 se...

SAMEHELSAMMAK · 09-15-2021

dear all i have the nim-vab-m on isr4331os : isr4300-universalk9.17.06.01a.SPA.bin i need to upgrade the fw for the nim to this version : nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg the current version isshow platform software subslot 0/1 module firmwareAv...

SAMEHELSAMMAK · 06-23-2021

DEAR ALL MY ROUTER IS CISCO ISR4331OS : isr4300-universalk9.17.05.01a.SPA.bin I AM USING THE NBAR protocol-pack : pp-adv-isr4000-173.1a-40-57.0.0.pack I LOADED IT ON ROUTER ip nbar protocol-pack bootflash:pp-adv-isr4000-173.1a-40-57.0.0.pack force IT...

SAMEHELSAMMAK · 02-25-2023

ip host tools.cisco.com 173.37.145.8ip http client source-interface ( YOUR INTERFACE ) call-homecontact-email-addr ( YOUR EMAIL )source-interface ( YOUR INTERFACE)http resolve-hostname ipv4-firstprofile "CiscoTAC"reporting smart-licensing-datadestina...

SAMEHELSAMMAK · 11-28-2021

YOU SHOULD USE THESE COMMANDS ip nbar protocol-pack bootflash:(GET THE NBAR FROM CISCO ) interface GigabitEthernet0/0/0ip nbar protocol-discovery interface GigabitEthernet0/0/1ip nbar protocol-discovery

SAMEHELSAMMAK · 11-16-2021

USE THIS INSTEAD username USER privilege 15 secret 9 PASSWORD

SAMEHELSAMMAK · 11-16-2021

AS I UNDERSTAND YOU ARE CONNECTING THE VDSL MODEM TO G0/0/0 IN BRIDGE MODE THE LOG SHOWS THAT THE INT G0/0/0 GETS DOWN THEN DIALER GETS DOWN AFTER IT THAT INDICATES A PROBLEM IN MODEM ITSELF NOT THE ROUTER CHNGE THE MODEM WITH NEW OR BETTER ONE THAT...

SAMEHELSAMMAK · 11-05-2021

the command is sh ver SH VERcisco ISR4331/K9 (1RU) processor with 7843220K/3071K bytes of memory.Processor board ID -=-----Router operating mode: Autonomous1 Ethernet interface3 Gigabit Ethernet interfaces1 ATM interface32768K bytes of non-volatile c...

Member Since	‎10-21-2017 01:09 AM
Date Last Visited	‎03-03-2023 12:43 AM
Posts	47
Total Helpful Votes Received	10

User Statistics

User Activity

isr4000 Application Visibility find ip address for the traffic

isr4331 as dns server

BLOCK SITE WITH ZBF ON ISR4331

NIM-VAB-M fw upgrade to nim_vab_phy_fw_A39t_B39g1_Bond39t.pkg

NBAR protocol-pack loaded BUT NOT ACTIVE

Re: Communications failure with the Cisco Smart License Utility (CSLU)

Re: NBAR No Data available

Re: 4331 router doesn't take secret password

Re: Internet Stops randomly for users ISR4331 PPPOE

Re: How to determine physical RAM installed in Cisco ISR 4000 IOS-XE