About thbgodoy

thbgodoy · 11-03-2020

Hi Experts, I am planning to install two modules of SM-X-PVDM-3000 on ISR4461 router, and I am in doubt about the maximum channels specs on the datasheet, that have below table: ble 5. Platform Availability for SM-X-PVDM Modules4000 Series Plat...

thbgodoy · 02-22-2021

152-7.E3 still have the same problem.... workaround aplied. Thank you guys!

thbgodoy · 11-24-2020

Hi Roger, Thank you for your answer. I talked with Cisco team and they said that the limit of 4000 channels will impact only the low complexity (g711a to g711u) transcoding, so that limit is regarding channels, and not PVDM in self. Its very confuse,...

thbgodoy · 07-24-2019

Jason, I did it and worked fine. Thanks for the answer. RegardsThomas

thbgodoy · 05-09-2019

Hello Jason, I am going to do same configuration in my cucm 11.5 cluster and I would like to know if you have done this and what procedure that you applied? ThanksThomas

thbgodoy · 05-09-2018

I am running NX-OS 8.1(2) and still having the same disturbing log....

Member Since	‎10-23-2017 11:22 AM
Date Last Visited	‎03-07-2021 02:16 PM
Posts	6
Total Helpful Votes Received	10

User Statistics

User Activity

SM-X-PVDM-3000 maximum channels support

Re: You should see these ip

Re: SM-X-PVDM-3000 maximum channels support

Re: Configuring DNS - CUCM 11.1.5

Re: Configuring DNS - CUCM 11.1.5

Re: CSCux77124 - No source info in " percentUSER-3-SYSTEM_MSG NTP Receive dropping message:" - 1