About a.vijayasekar

a.vijayasekar · 03-03-2003

I have a user who is unable to logon to Webview.The passwords and permissions have not changed.The user was able to logon earlier and view reports but now it displays an error "you are not authorized to view the page".We tried the URLs http://webview...

a.vijayasekar · 02-26-2003

There are 2 sites,the central and the remote site,both are 3660 routers.There are 3 T1s going between them.The Third T1 always shows a serial interface up and line protocol down.When the T1 actually goes down,it comes back up only after rebooting the...

a.vijayasekar · 02-25-2003

we have 32 2600 routers running 11.3(5)T and when we did a Network scanning,29 out of the 32 went into Rommon mode and the remaining 3 of them rebooted themselves and came back up fine.Is there any associated bug for the 2600 with Network scanning.Wh...

a.vijayasekar · 02-23-2003

HiWe have Unity 3.1-3a and we have this one user who is unable to retrieve the Voice Mail on his PC.All his Viewmail settings are the same as the others.When he plays a Voicemail on his PC,the icon moves just like normal but no audio is heard.The Vol...

a.vijayasekar · 02-21-2003

We have 2 Routers.The Remote Router(2600) sends the DHCP relay and forwarding packets to the Main Router(4700M).The DHCP forwarding packet has a Gateway IP address of 0.0.0.0.When the packets are relayed with special processing,why do they get forwar...

a.vijayasekar · 02-28-2003

Pete Did you upgrade the IOS on both ends or only on the main site router. Thanks Anu

a.vijayasekar · 02-25-2003

Yes.I found the SegV Exceptions link and I suspect its bug CSCdm64107.But the routers in ROMMON mode,I am not sure what the issue is yet.The Config register is 0x2102.I will check the bug list again as the routers are running a very early version - 1...

a.vijayasekar · 02-25-2003

Shanky Only 3 routers rebooted by themselves and came back up.The other routers were manually power-cycled.The reason for last reboot on the 29 routers which went to ROMMON mode is "System restarte by power on" because they were power-cycled.But th...

a.vijayasekar · 02-23-2003

We are playing the messages on the PC.We can retrieve it on the phone with no problem.This workstation is same as the others in the network.The other audio files are running fine and can be heard fine on the speakers.Only the Unity Voicemail messages...

a.vijayasekar · 02-21-2003

DonCan a IP DHCP Relay command be applied in this regard instead of the Ip helper address.But I am not sure if we can configure IP addresses with the IP Dhcp Relay Command.Thanks Anu

Member Since	‎07-30-2002 08:03 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	53

User Statistics

User Activity

Unable to logon to Webview

Serial Interface Up and Line protocol down

2600 Router in ROMMON mode

Unable to retrieve Voicemail from the PC

Blocking DHCP Forwarding packet

Re: Serial Interface Up and Line protocol down

Re: 2600 Router in ROMMON mode

Re: 2600 Router in ROMMON mode

Re: Unable to retrieve Voicemail from the PC

Re: Blocking DHCP Forwarding packet