svetlinski
Level 1
Level 1
Member since ‎10-24-2017
‎07-26-2019

User Statistics

  • 13 Posts
  • 0 Solutions
  • 15 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Replies

User Activity

Hi Everyone!I need to remove the Standby FW from our Active/Standby setup. Are you aware of anything specific that needs to be done? I have checked everywhere on the web, but there doesn't seem to be anything that I have to do prior to disconnecting ...
Hi All, We have a UCS server that has 3 NIC - 1 Management (CIMC) and 2 10Gb NICs. One of those 10Gb interfaces is using a static VLAN6 (10.10.6.x) address and the other a static VLAN7 (10.10.7.x) address. Each of those uses an Ethernet cable and con...
Hi Guys,   We have 2 stacked switches (WS-C2960XR-24TD-I). One is configured as a Master and the other as Member.    I changed the console password on the Master switch and that works fine. I plugged into the console port of the member and I can see ...
Hi,   We have an ASA 5516X running 9.5(2) and we need to upgrade the OS, in order to get a feature to edit the AnyConnect Connection Profile Options (XML). The recommended version is 9.6(2), but I can see that 9.9.1 is the most recent version.   What...
Hi,   We have an ASA 5516X running 9.5(2) and we need to upgrade the OS, in order to get a feature to edit the AnyConnect Connection Profile Options (XML). We were advised to go on to 9.6(2) which is the currently recommended version, but I can see t...
Community Statistics
Member Since ‎10-24-2017 07:34 AM
Date Last Visited ‎07-26-2019 02:36 AM
Posts 13
Helpful Votes Given To