About guy

guy · 08-12-2002

I have a 2611 4port Bri card connecting to ISP @ 256K using Multilink BRI.Connection OK . With all channels nailed open . Pings are ok with no packet loss. DNS seems fine BUT browsing through NAT to the Internet, http traffic is erratic , Basic www p...

guy · 08-12-2002

How do I place a priority on a bri interface so that the same channel is the first and only permanent connection and the others DOD.

guy · 08-18-2002

Overview, Customer is paying for a permanent connection on only one channel which will be up all the time, he also has the capacity for three more channels to come up on demand. I have configured this OK. But I need to ensure that the one permanent c...

guy · 08-13-2002

The most likely error is00:04:12: IP: s=10.51.10.100 (FastEthernet0/1), d=255.255.255.255, len 276, dispose udp.noport00:04:12: IP: s=10.51.10.100 (FastEthernet0/1), d=255.255.255.255, len 328, dispose udp.noportIs this the problem ? If so what cause...

Member Since	‎08-12-2002 02:41 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	4

User Statistics

User Activity

Packet Loss over Multilink BRI ?

Multilink BRI connection

Re: Multilink BRI connection

Re: Packet Loss over Multilink BRI ?