About kab00m

kab00m · 03-05-2022

Greetings, I am interested in attaching a recorder to Cisco TelePresence SX80 endpoint to record meetings. Video outputs settings have special role "Recorder" and I can get video from one side or both sides to HDMI output. Neither HDMI output or line...

kab00m · 11-08-2020

Greetings, I am using several ISR G2 routers (819, 2901, etc) configured as L2TP/IPSec VPN concentrators. I used standard documents and vpdn part now as follows: vpdn enable!vpdn-group L2TP ! Default L2TP VPDN group accept-dialin protocol l2tp virt...

kab00m · 10-20-2019

Greetings,I have outdated AIR-BR1310 with broken configuration. This is not about fixing it, but mostly about understanding why it works like it works. BR1310 is connected via trunk interface. Native VLAN have nothing, VLAN 26 is for wireless and VLA...

kab00m · 05-28-2019

Greetings,I have a router, which can be simplified as this:SRV <-> (111.111.111.0/24) <-> R1 <-> (provider /30 net with BGP)R1 is 2901 and also running ZBFW. All the setup is working. If I listen to my network on SRV i see lot of ARP queries from R1 ...

kab00m · 04-07-2019

Greetings!I want to utilize IBM DS4700 disk array with Cisco DS9148 switch, serving multiple hosts. I have managed to connect all ports (two ports from two controllers) from DS4700 to DS9148 and I use zoning to connect host ports to different array p...

kab00m · 10-20-2019

It is internal patch numbering, no special meaning for customer, except JX, which should be avoided for autonomous APs. You should use highest recommended version available and read release notes for it.

kab00m · 05-29-2019

About the ARP activity of the router:if the incoming sessions are to be dropped by ZBFW, the router should not even try to perform the ARP request fon an host in ther other zone.This looks like to be either a SW bug or a side effect of the drop log o...

kab00m · 05-29-2019

I also modified your solution - adding two /25 routes solve the problem not making you to spoil routing part of configuration with lot of /32 routes. Thank you once again!

kab00m · 05-29-2019

Thanks, as a workaround that works. Is there any explanation why ARP flooding happens?

kab00m · 02-13-2019

I wrote all configs once again and all switches named files in the right way. 1 tftp://tftp/cisco/otheld-confg.Jan-11-17-52-12-02 tftp://tftp/cisco/otheld-confg..Jan-16-11-43-18-13 tftp://tftp/cisco/otheld-confg.Feb-13-15-09-31-2 <- Most Recent It se...

Member Since	‎10-24-2017 10:44 AM
Date Last Visited	‎03-09-2022 10:31 PM
Posts	16
Total Helpful Votes Received	40

User Statistics

User Activity

Audio feedback with SX80.

L2TP port left open on ISR G2

Aironet not native VLAN for management

ISR G2 ARP flood while routing to non-existent hosts.

Connecting DS9148 to IBM DS4700

Re: ap 1140 different software

Re: ISR G2 ARP flood while routing to non-existent hosts.

Re: ISR G2 ARP flood while routing to non-existent hosts.

Re: ISR G2 ARP flood while routing to non-existent hosts.

Re: Cisco 2960 archive filename