About t3rebello

t3rebello · 11-01-2023

Hi folks,Running a Catalyst 9800-40 WLC. 1463 WAP's connected, predominantly C9136I WAP's. 8,817 active clients with 4,796 clients on our SSID using PEAP authentication via ISE on the back end. We are observing clients will frequently disconnect fro...

t3rebello · 09-18-2023

Hi folks,While troubleshooting an issue I noticed that the WLC 9800 CLI's log time does not match the GUI time or the time displayed when I run a show clock command.Is there a way to sync up the log time with the configured time? Thank you,-Travis R.

t3rebello · 01-13-2021

Hello folks,Our organization recently deployed WDAG (Windows Defender Application Guard) and we have noticed an intermittent error on our user machines when launching Cisco AnyConnect. The error they are getting is "Posture Assessment Failed: Hostsca...

t3rebello · 03-26-2024

No progress on the ticket. I ended up in the same place and have also left off with the idea to report the issue to Apple.So naturally we're stuck at this point. Reporting the issue to Apple feels like a printer's tray directly sending the print job ...

t3rebello · 02-27-2024

Adding to the thread - I am still getting this on ISE 3.2.0.542 patch 2,3

t3rebello · 02-22-2024

We still have not found a solution to this issue as of 2/22/2024, even after two separate TAC cases.Listcsbgnetsecurity----is your WAP model you are having issues with a Catalyst 9136 AP specifically?We are still working with Cisco to see if we can b...

t3rebello · 02-01-2024

We did not end up enabling FT yet, but we do still intend on doing that in a maintenance window. The latest development with TAC was a suggestion to disable PMF, as we previously had it set to optional.I am still collecting debugs to see if we can di...

t3rebello · 01-16-2024

Long update since the last but we are still facing this issue. PMF as optional did not resolve the problem.Cisco's next recommendation is to enable FT, but I do not have much faith in this as the answer, as the clients experiencing the problem are of...

Member Since	‎06-29-2017 10:58 AM
Date Last Visited	‎04-19-2024 12:05 AM
Posts	28
Total Helpful Votes Received	8

User Statistics

User Activity

Client devices reporting 'Incorrect Wi-Fi password' on PEAP network

Catalyst 9800-40 WLC CLI log time

Cisco AnyConnect and Windows Defender Application Guard

Re: Client devices reporting 'Incorrect Wi-Fi password' on PEAP networ

Re: Ise sends replication alarms but all nodes seem to be synced

Re: Client devices reporting 'Incorrect Wi-Fi password' on PEAP networ

Re: Client devices reporting 'Incorrect Wi-Fi password' on PEAP networ

Re: Client devices reporting 'Incorrect Wi-Fi password' on PEAP networ