About firemonkey123

firemonkey123 · 01-31-2015

Hi all, I need help with portwarding on cisco 1841 to my dvr.DVR: ip- 192.168.146.5/24, server port - 7777, 8888(mobile), http port - 80I am able to remote to the dvr via public public using static nat, the browser would load the camera and ask to si...

firemonkey123 · 01-27-2015

Hi all,Hope I'm not too out of line here. I have Cisco 1841 with software version 12.4. For some reason, nating on dialer interface won't overload. I can only access google and facebook, but not any other site, it will just keep on trying to access t...

firemonkey123 · 02-10-2015

Ahh finally got it to work on my own after much trials and errors. If those who having this issue, all I need was portwarding all the ports associated with the DVR hence 80, 7777, and 8888 like soip nat inside source static tcp/udp 192.168.146.5 80 i...

firemonkey123 · 01-31-2015

Static Nat should be:ip nat inside source static tcp 192.168.146.5 80 interface Dialer1 7777

firemonkey123 · 01-29-2015

Thanks for your suggestions but that didn't work. When I can't get out into the internet first thing come to mind was something wrong with NAT. If I didn't overload NAT, then only 1 person can go out to the internet at least that's my logic. And that...

firemonkey123 · 01-29-2015

It is working now after added ip tcp adjust-mss 1452 line into to all interfaces. But I notice that the throughput is a little bit slower then when I was using Endian UTM 3.0 firewall. Maybe because cisco 1800 is too old, but I can live with that.Tha...

Member Since	‎01-27-2015 03:46 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

Portforwarding to DVR (Help)

CISCO 1841 Won't Overload NAT

Ahh finally got it to work on

Static Nat should be:ip nat

Thanks for your suggestions

It is working now after added