For Activation evalutaion CUCME Featues use below command. Router#show license all ........ StoreIndex: 1 Feature: uck9 Version: 1.0 License Type: EvalRightToUse License State: Not in Use, EULA not accepted Evaluation total period: 8 weeks 4 days Evaluation period left: 8 weeks 4 days Period used: 0 minute 0 second License Count: Non-Counted License Priority: None For Reference • Use below commands to activate the evaluation uc feature o license boot module <routermodel> technology-package uck9 o reload For Smart Licensing refer below On the Unified CME router, you need to ensure that the call home feature is not disabled. Also, Smart Licensing feature should be enabled at the router using the CLI command license smart enable . Use the no form of the command to disable smart licensing. For more information on configuring Smart Licensing in your router, see Software Activation Configuration Guide, Cisco IOS Release 15M&T. Once the smart license is enabled and the router is not yet registered with CSSM, the device enters an evaluation period of 90 days. You can register the router to CSSM with the token ID. To register the device (Unified CME router) with CSSM, use the CLI command license smart register idtoken . For information on registering the device with CSSM, see Software Activation Configuration Guide. *** Please rate helpful post; Mark "Accept as a Solution" if applicable Thanks, Haris
... View more
.jpg "VIP Collaborator"){kind=icon}
