Hi,I working with FTD 6.7 and 7.0 (now called Cisco secure firewall). I noticed that I can do a VTI tunnel to a router, ASA, or other firewall (like Fortinet or PA) that does route based VPNs but when I try and configure a route based VPN tunnel betw...
Dear Community, I'm currently deploying ACI multisite for a client and I have to do it in a phase deployment where we are moving from the old environment to the new local ACI environment. This is not a migration from a existing ACI fabric into Multis...
Hi, Has anyone run into the "Channel down" issue when updating the identity certificate on the Stealthwatch SMCv and SFCv. I'm doing a POC for a client and every time I go an update the identity cert the SMC says "it could save the configuration" and...
Has anyone figured out a way to load balance PSNs behind a F5 load balancer? I looked at some configuration guides and they are all for F5 11.4. I'm using version 13.0 so the direction a not valid from my situation. The main issue I am having is post...
Community, Has anyone been able to get PxGrid to work with FMC/FTD because I am running into an issue with it in my POC lab: ISE version 2.6 (using Internal CA for PxGrid)FMC version 6.6.0FTD version 6.6.0Windows 2016 AD (Enterprise CA) To simplify t...
Anurag, Here is a packtet capture from my POC from the PSN to the NAD. I see the source port (coming from the PSN behind the F5) is 30026. Shouldn't that be udp 1700?
Damien, I create a SNAT rule on the F5 (per documentation) so that the PSNs will be translated to the VIP. Are you doing posturing as well at your customers or just authentication?
Anurag,I used those guides to setup the F5 and that's when I ran into the problem. Right now the NAD keeps flapping between radius server dead and radius server alive
