About oighodaro1

oighodaro1 · 01-30-2015

Hello Everyone, This is my first post and I am hoping I have come to the right place. Background: I work for a non-profit and we are hoping to get new switches this summer. Our networking infrastructure consist of LAN and WLAN. We are currently using...

oighodaro1 · 02-24-2015

I like this plan just some questions.Are we doing it for Gi5/1-20 as a test to see if the TCN doesn't increase as much ? I have Gi4/0 to Gi9/48 should I do this for all ports except the AP ports ? Thanks

oighodaro1 · 02-24-2015

1. Yes we don't have VOIP phones, the computers connect directly to the 6500 switch. 2. Users do not need trunks to their laptops, they just need access show int trunk Port Mode Encapsulation Status Native vlan Gi1/2 ...

oighodaro1 · 02-23-2015

My access to the Dell switches are very limited. I can't ssh into the console to get a low level access. The configuration screen is very limited.I am using the Dell PowerConnect 2748. I have looked it up the Dell PowerConnect 2748 doesn't support ST...

oighodaro1 · 02-23-2015

VLAN0001 is executing the rstp compatible Spanning Tree protocol Bridge Identifier has priority 8196, address 00d0.0405.0c01 Configured hello time 2, max age 20, forward delay 15, tranmsit hold-count 6 We are the root of the spanning tree To...

oighodaro1 · 02-23-2015

6500 wired port config GigabitEthernet5/8 is up, line protocol is up (connected) Hardware is C6k 1000Mb 802.3, address is 0023.0486.bbb7 (bia 0023.0486.bbb7) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 1/255,...

Member Since	‎01-30-2015 10:47 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	17

User Statistics

User Activity

Network Problems and Symptoms

I like this plan just some

1. Yes we don't have VOIP

My access to the Dell

VLAN0001 is executing the

6500 wired port config