Hello,I'm having similar issues to some of the post I read on here about PPP and ADSL. However my issue isn't fixed by any of the resolution I see. The following is my output log from debug ppp488578: Sep 5 19:22:47.408: %DIALER-6-BIND: Interface Vi2...
The following are the configs for a flexVPN hub/spoke connections. I keep receiving the following error on the spokeMain-Store#*Apr 4 20:32:47.513: %FLEXVPN-6-FLEXVPN_CONNECTION_DOWN: FlexVPN(FLEX_HUBS) Client_public_addr = 172.16.2.2 Server_public_a...
I'm supposed to see the lxc routem under documentation in UWM but its not available. Neither is the node available on the CML Client.
Is my install broken?
How do I get the node to appear in the CML client as well as the documentation on ...
M02@rt37 The MTU and MRU settings are correct. We troubleshot with the service provider and it seems that their ONT device is not set to bridge mode. So our device and the ONT device have the same IP. We believe that's where the termreq come in when ...
In a DMVPN network i have several static routes. I've redistributed those routes into EIGRP. However I noticed there are several static routes that point to public IP address. How do I redistribute the static routes but leave out the static routes po...
