About claurie

claurie · 10-20-2021

Hi All,Following the Cisco Config guide (https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/xe-16/nat-xe-16-book/iadnat-cgn.html) for ASR1001-X, I have configured Dynamic Port Address CGN and it is operational. The following a...

claurie · 09-01-2021

Hi Community,I am in desperate need of direction/assistance. In trying to achieve my aim, I keep going around in circles, not getting any closer.I have a Catalyst 3850 with several VLAN Trunk Ports with multiple VLANs on each.I need to apply shaping ...

claurie · 08-09-2021

Hi Community,I have a Catalyst 3850 running IOS 16.3.I have several VLANs on an 802.1Q Trunk, being delivered by a service provider (SP). I need to individually Shape traffic for each VLAN. When I use the Shaping Average command, I receive the follow...

claurie · 05-15-2021

Hi Team,I have Configured NAT64 on an ASR. It appears everything is working as required until the outgoing DNS64 Addressed IPv6 packets 'hit the NAT64 server (ASR)' on Int GE0/0/0. Int GE0/0/3.31211 is connected to the IPv6 only host. Keen to hear wh...

claurie · 04-28-2021

Hi Folks,I am an IPv6 newbie and I have a problem.We have been using an ASR1001-X as our Border/Transit router successfully on IPv4 running eBGP and internally to L3 Switch using OSPF.I have successful eBGP IPv6 session with ISP. I can ping public IP...

claurie · 01-31-2023

Hi,That is certainly not something you want to be doing all the time. No solution as yet, although I have made some changes to our network recently and plan to test the CGNAT again soon. BTW, I answered Paul's post above - we are using external publi...

claurie · 01-31-2023

Hi Paul,Thanks for your question. This project has been on the backburner for quite a while. Currently using external/public DNS.Thanks

claurie · 01-23-2022

Hi Georg, Apologies for leaving this subject for several months. Further to the running config I posted in October, I realised I did not provide the sh int ouput for our Outgoing interfaces. Please see below: GigabitEthernet0/0/0 is up, line protocol...

claurie · 10-25-2021

Router#sh runBuilding configuration...Current configuration : 32471 bytes!! Last configuration change at 13:27:54 AEDT Wed Oct 20 2021!version 16.9service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption! ...

claurie · 09-19-2021

Hi Joseph,Apologies for the lack of clarity. Point taken with the Voice Class. I have updated to Match dscp efAlso, this switch provides the Access layer for customer circuits (the VLANs) to connect to our Network Node. INT GE1/0/1 is the upstream li...

Member Since	‎10-26-2017 12:23 AM
Date Last Visited	‎02-01-2023 12:18 AM
Posts	36
Total Helpful Votes Received	15

User Statistics

User Activity

Very Slow webpage loading - Dynamic Port Address Carrier Grade NAT

Configuring Catalyst 3850 for QoS/Shaping on 802.1Q VLANs

VLAN Traffic Shaping - Catalyst 3850

NAT64 Dropping IPv6 to IPv4 Packets

IPv6 config on Border Router ASR1001-X

Re: Very Slow webpage loading - Dynamic Port Address Carrier Grade NAT

Re: Very Slow webpage loading - Dynamic Port Address Carrier Grade NAT

Re: Very Slow webpage loading - Dynamic Port Address Carrier Grade NAT

Re: Very Slow webpage loading - Dynamic Port Address Carrier Grade NAT

Re: Configuring Catalyst 3850 for QoS/Shaping on 802.1Q VLANs