IntroductionValidated DesignTraffic Flow in Cisco Wireless SD-Access solutionMeraki Wireless Design FundamentalMeraki Device-to-Cloud CommunicationsLab SetupConfigurationValidation
Introduction
With the evolution of software defined networking (SD...
IntroductionLab SetupPrerequisitesFlow DiagramConfigurationIntegration of ISE and Meraki DashboardSync data from ISE to MerakiVerify the policy, SGTs and SGACL on MerakiTesting & TroubleshootingLimitation
Introduction
Cisco TrustSec (CTS) solution ...
Hi Experts,
My customer is asking for Port Pairing (NIC Teaming) for Data port. The customer is going to use only one Data Port for to and fro traffic and want to pair P1 and P2 interface.
My question to you is if there is any downside of using port ...
Hi Experts,
My customer got WSA S695 appliances and want to connect to 10G. In Datasheet and hardware guide I don't see P1 and P2 interfaces can be replaced with 10G port.
Ref: https://www.cisco.com/c/en/us/products/collateral/security/content-securi...
Hello Everyone,
Issue: SGT based ACP doesn't work for static IP-SGT.
Scenario: Have FTD managed by FMC (both version 6.4.0.4). FMC is integrated to ISE version 2.4 p11. After successful integration we can see SGT in FMC.
In ISE we have static IP-SGT ...
Thanks, Balaji for your response.
I would like to update you that i quick discussion with Senior TAC guy and he said that NIC teaming or NIC pairing is available from Async OS 11.7.
Regards,
Jay
Hi Guys,
I had offline discussion with John Eppich, and understood that access policy in WSA is not possible on the basis of ISE authenticated active user session, it is possible with either SGT or with AD Groups.
Regards,
Jay
it means, deploying DSR feature is not possible without Load Balancer. Correct me if my understanding is wrong!
Now, in scenario where customer doesn't have Load Balance and have 4 ESA appliances, what would be best design so that customer can load...
