we are a very small network here with only one real ip and 10 local inside ip's and we are using pat to map the group of local inside ips to one global ip but there are lot of problems occuring will using voice applications such as net2phone or so .....

we are a very small network here with only one real ip and 10 local inside ip's and we are using pat to map the group of local inside ips to one global ip but there are lot of problems occuring will using voice applications such as net2phone or s...

i have two 4006 distribution switch with 16 (3550 switch) under them and i want to link the 16 access switches to the two 4006 switch redundantly and i am confused on how to do it with the best performance ... 1- connect the 2 GBIC of the 3550 switch...

can i connect the ports of the x4124-fx-mtrj module of a distribution switch (4006) to the GBIC ports of an access switch (3550) orin another way if i want to connect 20 GBIC ports from 10 switches (3550) to a 4006 switch ... can they be connected to...

can i connect a port from the 2gbic module of my 3548 switch to the WS-x4124- fx -MT 24port 100 fx MTRJ of my 4006 switch bringing in mind that i have 16 switch(3548) and i want to link them to 2 4006 switches using an uplink of fiber or cat 6 ....