About wrkemmer

wrkemmer · 05-20-2008

I have an interesting situation I could use some help on. I have a route pattern "8" which just goes over a trunk to activate a paging system. This was working fine (dial 8 and receive tone back from the paging system) until a couple of days ago, w...

wrkemmer · 05-09-2008

Hello All,A quick voice gateway design question. I have a 2811 currently acting as a WAN router for two remote sites. I have a 3750 switch stack, which is doing routing for my main site VLANS (about 10 vlans). Right now I have a routed link betwee...

wrkemmer · 04-24-2008

Hello. I'm wondering if anyone has any thoughts on this issue. Customer's network is addressed as 192.168.1.x /24. They're using an ASA to Cisco VPN clients for remote access. The issue is that the office from which I work is also addressed as 19...

wrkemmer · 09-06-2007

Hello,I have a Cisco 1841 router with (1) VWIC2-2MFT-T1/E1 card. I need to terminate 2 data T1s on this card and bond them with MLPPP. I just wanted to make sure this is possible with this card before I attempt this. Thanks for the help.

wrkemmer · 08-22-2007

Something simple that I haven't been able to figure out.On the 7960/40 phone models, I used to be able to get into network settings, scroll down to option 33 and hit **# to allow me to erase the network settings. This would clear everything and grab...

wrkemmer · 05-20-2008

Rebooted the pub. no change. this is very strange. There is nothing in the system that it should be trying to match, yet when I clear the urgent priority flag from the 8 route pattern it definately waits for the interdigit timeout. Is there anywh...

wrkemmer · 08-24-2007

Thank you. That did it.

wrkemmer · 11-01-2006

The issue with that is that I will still be using g711 intrasite---g729 will only be used between sites. Example: Phone/call in site A needs to connect to IVR in site A-should be no problem (all g711). But if Phone/call on Site A needs to go over t...

wrkemmer · 10-10-2006

I had already seen that list. Unfortunately, there is no field notice for Sept. 2005, so this update is not included. It seems odd to me that, when this update came out in Sept. 2005, that there was no mention of it on cisco.com anywhere. It seems...

wrkemmer · 05-19-2006

Yes, that was it. Thank you!

Member Since	‎08-26-2002 05:30 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	112
Total Helpful Votes Received	5

User Statistics

User Activity

PotentialMatchesExist

Voice GW Design

Cisco VPN Client-Duplicate Subnet at Main and Remote

1841 with MFT and MLPPP

7961/41-Clear network settings

Re: PotentialMatchesExist

Re: 7961/41-Clear network settings

Re: Designing Transcoding After the Fact

Re: ICM 6.0--Ms Update 891861

Re: Cross Server Logon Dial String