Dear All, I have 2951 Router that has EasyVPN configured on it and I would to tunnel the internet traffic as well but not doing Split-Tunnel. This is what I wish to achieveMy router is residing in the UK with Vodafone ISP at home.When I am overseas f...
Dear All, In 2951 Router with CUCME 12.0 and 3 8865 Phone registered to it.I have a local landline thats connected to voice-port 0/0/0 and an Obihaltalk connected to voice-port 0/0/1 that has google voice configured. The setup works well but my prob...
@rogerro wrote:Hi, Do you have the config of the vpn server?Take a look a the following link:https://www.cisco.com/c/dam/en/us/products/collateral/security/ios-easy-vpn/prod_white_paper0900aecd80313bd6.pdf Regards, Hello Sir, Thanks for your respon...
@Chris Deren wrote:From the debug it looks like single digit was dialed "1", how did you dial enblock or digit by digit? One thing you are missing is inbund voip dial-peer, can you add something like: dial-peer voice 10 voipdescription CME - Inbounds...
@Chris Deren wrote:What country is this in? Looking at dial-peers 2 and 3 they are overlapping which may cause issues depending on what you are dialing. I would suggest capturing "debug voice ccapi inout" for the failed call, which will tell us wha...
@Chris Deren wrote:What country is this in? Looking at dial-peers 2 and 3 they are overlapping which may cause issues depending on what you are dialing. I would suggest capturing "debug voice ccapi inout" for the failed call, which will tell us wha...
