Dear team,i have cisco 2900 series router and i have a sucessfully configured NAT which routes all my internal users from the 10.*.*.*.* private LAN address to the internet. i have one public IP. The NAT is confiugred the usual way. NOW, What I want ...
dear all participants of cisco forums,
I recentelly reconfigured my cissco 2911 router from scratch and i configured the NAT, but for some reason it is not doing the routing and it is not picking up hte default gatway, all i get is "Gateway of last r...
Hello Everyone,
I was in the process of backing up a 2911 router. after sucefully backing up the startup configuration, i accidentally deleted the "IOS image" from the flash0 : memory. now the router is in rommon1> mode, how can i reset or reload my ...
Thanks Gorg,it has worked , buti wanna add one more questions, obviously all my users don't call my web app using IP addresses from the internet which is too risky from security point of view, so how can i configure it to be called on using some addr...
SOLVED!!!!,
Dear All,
I have now finally resolved the issue of the router to copy the IOS from tftp to flash. it turns out the problem was that the interface which i was communicating with the TFTP server had a diffrent IP settings in the startuu...
Dear Richard,
I hope you saw my post below showing the output of the TFTP server . As you can see the router sucessfully boots from the TFTP server, but it doesnt ping it or doesnt download the IOS file from the TFTP afterwards.
kindly give you...
