About ovt

ovt · 06-09-2009

Is "ip flow egress" supported on this platform? Is it possible to collect bidir stats if Netflow configured as follows:interface vlan ... ip flow ingress ip flow egress

ovt · 01-07-2009

Does anybody knows what this feature was designed for?username newuser attributesmemberof DevTest,managementIs it another form of Group Lock feature?username newuser attributesgroup-lock <tunnel-group1>Thx.

ovt · 12-23-2008

On the ftp://ftp-sj.cisco.com/pub/mibs/supportlists/wsc6000/wsc6000-supportlist-ios.html I see that lot of MIBs are supported by the Cat65k, for example SMON-MIB, HC-RMON-MIB, RMON-MIB, RMON2-MIB, IF-MIB, etc. Which of them are supported by the Cat65...

ovt · 11-19-2008

Hi!I'm testing Clean Access in In-band VGW mode with clients that are *not* directly connected to the CAS (i.e. L3-adj. mode).Can anybody tell me do I need to configure static routes on the CAS for user subnets? It seems that the CAS always send traf...

ovt · 10-02-2008

Is it possible to create a SNMPv3 user which can only be used for traps (SNMP GET requests will not be allowed from the same NMS)?It seems that creating "notify group" also allows reads:snmp-server group trapgroup v3 auth notify v1defaultshow snmp gr...

ovt · 12-23-2008

Is IF-MIB ("1.3.6.1.2.1.31" and "1.3.6.1.2.1.2") supported in hardware? "show interface" or "show interface counters" seem to show correct values :)

ovt · 11-21-2008

Answering my own question: "which interface, trusted or untrusted, the CAS will use to communicate with clients in case it has the same IP on the untrusted and trusted interfaces and no other routes configured, except the default route?".The Answer: ...

ovt · 11-21-2008

Thanks a lot for the replay, however it doesn't help.> The traffic destine for client will have to come in the trusted and out the untrusted. The return traffic has to come in the untrusted and out the trusted. This is only correct from bridging poin...

ovt · 11-20-2008

From the doc:The VPN Concentrator implementation of NAT-T supports IPSec peers behind a single NAT/PAT device as follows: â€¢One Microsoft L2TP/IPSec client. â€¢One LAN-to-LAN connection. â€¢Either a LAN-to-LAN connection or multiple remote access cl...

ovt · 11-20-2008

> All other subnets will need a static route1. Why does the CAS need a static route if it already has default route via the trusted interface ???2. In case I configure the static route should I specify the trusted interface or untrusted interface in ...

Member Since	‎09-11-2002 10:50 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	452
Total Helpful Votes Received	89

User Statistics

User Activity

Egress NetFlow on 7600

ASA 8.0(2) "memberof" command question

6500: which MIBs are supported in hardware on this platform?

NAC Appliance in IB VGW L3 mode - routing question

SNMPv3 granular access control for traps and reads?

Re: 6500: which MIBs are supported in hardware on this platform?

Re: NAC Appliance in IB VGW L3 mode - routing question

Re: NAC Appliance in IB VGW L3 mode - routing question

Re: Problem with VPN 3030 connecting remote devices that receive

Re: NAC Appliance in IB VGW L3 mode - routing question