Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have a network which requires redundancy. I need to have 2 firewalls and 2 distribution switches.
I have come up with a design idea however I’m not sure if this is the correct way to achieve the desired results, but with that said from...
Hi all, I’ve recently started managing a network for in a building that provides serviced offices and our tenant’s pay for each port they use. However our tenants often plug their own switches into our network to gain access to more ports, connect AP...
I believe you can only have an average 5 minute PPS, for example, OID:1.3.6.1.4.1.9.2.2.1.1.7I would suggest looking at the SNMP Object Navigator on Cisco's website, the MIB file will provide a description of each OID. https://snmp.cloudapps.cisco.c...
The Cisco FindIT Network Discovery Tool may help, however this will only discover Cisco devices. Alternatively you could use PRTG which is free (up to 100 sensors) but you'll need to configure SNMP on each device. You could use "show cdp neighbours ...
You can use the "show interface <interface> switchport" command to confirm the operational trunking encapsulation. ISL is not supported on newer devices.
