Hi there,We have a PIX 501 which a customers uses as a VPN end-point to RDP via the Internet to their servers on the inside of the PIX. The VPN works fine and the customer can connect to their server using RDP, however when a 2nd user connects to th...

Hi All,I'm trying to influence our routing so that traffic that is coming into our network via a certain AS number will hopefully avoid that AS number and take a different path. I'm thinking of doing this using AS prepends to the specific AS number,...

Hi,I am trying to get an Aterix server to talk SIP to an AS5300.The AS5300 is running IOS version "c5300-is-mz.123-20.bin"When the Asterix starts talking SIP to the AS5300 the AS5300 responds with the following messageSIP/2.0 405 Method Not AllowedTh...

Hi All,I'm after some advice on a network design for a small ISP please. Currently this ISP has one POP in location1 and they are looking to expand into location2. Transit bandwidth is cheaper in location2 so it would be advantageous to connect both...

Hi,Yesterday i was on a customer site helping them with a firewall replacement. They had changed their firewall from one vendor to Cisco and installed a PIX 525 running 7.2. The PIX had four interfaces, outside, inside, mail_DMZ and VPN_DMZ. The V...