HiI have a SDSL G.DMT service with Zen.We have purchased an 878 and put a basic config on it.It refuses to show even a CD led when connected up to the copper wire.Has anyone got a sample config for the controller which shows all the lines needed to g...

This is a sort of generalised question. Someone has asked, and am actually scratching my head thinking that he has the wrong end of the stick entirely and I want to put him straight.The sceanrio is:we are going over to another ISP for our Internet/si...

This is just a general question to which I would a simple yes or no will suffice:Company has a Web server on a single DMZ. External customers process orders via Internet on this server.The Server, however, must pass all information back to Oracle ser...

I am investigating the use of AIM cards in 2600 series routers. Has anyone successful experience of compressing data on a 2600 then pushing it out via an ethernet port to a firewall and then out to the internet over VPN to another office with the sam...

Am I making life difficult for myself?I would like adhoc PCAW access thru a NAT router to a host on the LAN.At the moment NAT is using the WAN ip address (dynamic).Is it possible to create a static mapping to allow tcp port 5162 and udp port 5163 to ...