About NTAUSD

NTAUSD · 08-28-2023

We have about 60 Catalyst switches of this model. I started upgrading 17 of them from IOS 15.0.2-EX5 to 15.2.7-E7 but have potentially run into this bug (CSCvf24186) on 2 of them so far, the other 15 have updated successfully. At this point I've stop...

NTAUSD · 09-06-2023

Thanks for the help Leo. TAC replaced both switches via RMA. Here is their response regarding the issue.Thank you for the detailed response describing the issue you are facing.I researched our internal database regarding the “% Front-end Microcode IM...

NTAUSD · 08-28-2023

Thanks Leo, I've already tried hard reboots, even leaving the power cable unplugged over a weekend. At this moment I'm prepared to RMA these 2 switches but I'm worried how often I'm going to run into this issue with the other 43 switches I have yet t...

NTAUSD · 09-20-2019

Thanks for this info. I didn't have a stacking module installed but after reading your post I figured what could it hurt. My issue was resolved by adding a stacking module, switch booted right up, saved config, shutdown and removed stacking module. S...

Member Since	‎11-01-2017 10:22 AM
Date Last Visited	‎04-24-2024 12:05 AM
Posts	4
Total Helpful Votes Received	15

User Statistics

User Activity

WS-C2960X-24PS-L won't boot after IOS upgrade

Re: WS-C2960X-24PS-L won't boot after IOS upgrade

Re: WS-C2960X-24PS-L won't boot after IOS upgrade

Re: Stuck at POST: Thermal Tests : Begin