About Wan_Whisperer

Wan_Whisperer · 04-20-2023

I am modifying an existing network work design to allow full IP redundancy across two networks using HSRP.Ideally, I would not trunk VLANs across two data centers I would implement VXLAN to limit the broadcast domain. Take a look at my diagram. I ha...

Wan_Whisperer · 02-02-2023

Network has been stable for years Two routers using HSRP routing on a stick connected to a switchMany subinterfaces but all of the sudden some EIGRP vlans are flapping. Looking at "show ip eigrp neighbors" the SRTT times are way different. Is that ...

Wan_Whisperer · 01-19-2023

Project ideal from the bossI have two data centers connected via a dedicated transport L3 link. Each data center has it own core routing and switching devices and unique vlans.The goal would be to be able to have a hybird flat network and have the a...

Wan_Whisperer · 12-22-2022

I have two routers configured for HSRP. The interfaces connecting to the Switch is using subinterfaces. see below R1 int f0/1.2description Vlan2encapsulation dot1Q 2ip address 192.168.2.2 255.255.255.0standby 2 ip 192.168.2.1standby 2 timers msec...

Wan_Whisperer · 12-06-2022

What is acceptable interface saturation/utilization before an upgrade is needed?The interface from my core router to my core switch is hitting about 50% utilization consistently. In the past, it was around 65% and I did not notice any issues. When do...

Wan_Whisperer · 01-20-2023

From what I read about Evpn/vxlan and xconnect/pseudowire they both great ideas for a flat vlan network. The major issue I am having is the routing. Is it possible to have the same default gateway at each data center?

Wan_Whisperer · 01-19-2023

I posted my diagram of one DC they are both exactly the same. LMK if you need anything else.

Wan_Whisperer · 12-28-2022

Paul, Because you got it working with my configs I am just going to assume it's related to GNS3. I will test the configs on my real environment in a few weeks.Thanks,WW

Wan_Whisperer · 12-22-2022

No, the port channel on the Routers and not building : R1# show etherchannel 1 summaryFlags: D - down P - in port-channel I - stand-alone s - suspended R - Layer3 S - Layer2 U - in useGroup Port-channel Ports

Wan_Whisperer · 12-22-2022

After running the command show etherchannel sum on the router it looks like port-Channel 1 is not building. I ran debug etherchanel ***see results at the bottom of this post.*** R1#sho ip int bInterface IP-Address OK? Method S...

Member Since	‎11-21-2017 10:24 AM
Date Last Visited	‎12-11-2023 08:05 AM
Posts	119
Total Helpful Votes Received	35

User Statistics

User Activity

HSRP and EIGRP across two data centers

EIGRP SRTT each location different? flapping issue PEER-TERMINATION

Hybird Flat network across two datacenters

Can't build EIGRP with Port-Channel sub interfaces and HSRP

acceptable interface saturation

Re: Hybird Flat network across two datacenters

Re: Hybird Flat network across two datacenters

Re: Can't build EIGRP with Port-Channel sub interfaces and HSRP

Re: Can't build EIGRP with Port-Channel sub interfaces and HSRP

Re: Can't build EIGRP with Port-Channel sub interfaces and HSRP