About jholman96

jholman96 · 11-23-2017

I'm not entirely sure what I'm doing wrong. I configured the inter-VLAN routing from the main router with the IP addresses I used as default router for the DHCP pools I also set in the main router. I set the spanning-tree VLANs and even added switchp...

jholman96 · 11-25-2017

I checked VLAN 30, and it's fine. But I can't even ping VLAN 80 on either one of the MDF Core switches. I even tried pinging the default gateways (whatever vlan the pc is on) and still got requested time out. I'm not sure what is wrong, exactly? It t...

jholman96 · 11-25-2017

I added portfast to the ports going to the end devices, but I still can't ping them. It still keeps requesting time out. Anything I'm doing wrong?

jholman96 · 11-24-2017

This seems to work almost perfectly. It keeps requesting time out when I try to ping the ip addresses. Do I have to have portfast on to fix that? And if I change some ports to different VLANS (already stated in vtp) via switchport access on an IDF an...

jholman96 · 11-24-2017

So I attached the PC and phone together on both IDF Switch 1 and IDF Switch 2 for PC0 and PC1, and only PC0, IP Phone 1, and IP Phone 2 were able to get IP addresses. PC1 couldn't get it, even after an ipconfig /release and /renew.

jholman96 · 11-24-2017

https://drive.google.com/file/d/1UNj8ZwAlJE5g8fsN9LwPP1Ddxl9ltDcA/view?usp=sharing

Member Since	‎11-23-2017 06:43 AM
Date Last Visited	‎11-26-2017 01:50 PM
Posts	10

User Statistics

User Activity

Can't get DHCP to work in Spanning Tree

Re: Can't get DHCP to work in Spanning Tree

Re: Can't get DHCP to work in Spanning Tree

Re: Can't get DHCP to work in Spanning Tree

Re: Can't get DHCP to work in Spanning Tree

Re: Can't get DHCP to work in Spanning Tree