My AP1852 reboot loop and can't join WLC. I tried update image, but failed. The info as below.(Cisco Controller) >show ap join stats detailed d4:2c:44:e6:e1:40 Sync phase statistics- Time at sync request received............................ Not appli...

Cisco2960:interface Vlan6no ip addressipv6 address 2001:DB8:0:22::3/64ipv6 enableinterface FastEthernet0/24switchport mode trunkipv6 unicast-routingCisco3560:interface Vlan6mac-address 0001.64ba.ba02no ip addressipv6 address 2001:DB8:0:22::2/64ipv6 e...

My 1852i disconnect from WLC. And I start it display below. Sometimes need to input new username and password\ SSID, but I can't save it. And it automatically loop restart. Start the indicator is solid green. After a while blink green, and then blink...

My 1852i disconnect from WLC. And I start it display below. Sometimes need to input new username and password\ SSID, but I can't save it. And it automatically loop restart. Start the indicator is solid green. After a while blink green, and then blink...

Thanks for your reply,  abedalmawlaitani.I have fixed this, but my configuration is different from your.1st, I didn't find the advanced mode.2nd, I enable the fast lane.3rd, in option "advanced" 802.11k enable(default), 802.11r adaptive(default), 802...