Dear Team, We have upgraded UCCX from 11.6 to 12.5. Post upgrade, unable to login OS admin for both Primary and Secondary Servers (Both CLI and GUI) using the same credential, but we are able to login uccx Administration page successfully. Is it a B...
Dear All,
Is there any way we can enable whiteBoard feature on-prem registered DX80 end point (CUCM Registered). I can see only this supported on Cisco WebEx clloud.
Regards
Dear Team, Cisco Phones are restarting the exact time interval (every 4 hours) for both SIP and SCCP phones. Attached is the one of the console logs. As per the sys log application logs this is due to TCP timeout but there is nothing found from netwo...
As I have mentioned earlier, the DX80 is already registered on cucm and all the features are working except whiteBoard feature. As per the below link, it won't support on-prem registered devices and also noticed some other posts that it's on the roa...
Yes, we found the issue and fixed. We were using Cisco Firepower firewall and there is Bug ID: CSCvj05640Each active firewall was rebooting every 8 hours (as the active unit was changing, so a reboot every 4h) and the same time phones also rebooting....
