Hi all, I want to permit several VLAN reach internet but can't with the setup (maybe poorly!) I designed. Here goes...I have 3 VLANs to do InterVLAN routing in a switch Layer 3 and for reach the internet with gateway. My problem is the L3 switch that...
Hi all,
Been searching the forum but had no luck on finding answer...
I have a SG500-52 switch that I need to configure for Inter VLAN routing.
I have 3 vlans:
vlan database
vlan 100,110,120
exit
and the following ip scheme:
interface vlan 100
na...
Hi,
I have a layer 3 switch (SG500) and I created VLANs in it.
I have a Microsoft DHCP server that I need to serve all my VLANs. When I plug in a PC in VLAN110 I cannot get addresses. If I put it in VLAN120 all works fine.
Part of the config is:
...
I already have done it: interface vlan 100 name FORMACAO ip address 192.168.100.50 255.255.255.0 ip dhcp relay enable !interface vlan 110 name OPERACOES ip address 192.168.110.50 255.255.255.0 ip dhcp relay enable !interface vlan 120 name SERVID...
Thanks for the answer.
I've been overwhelmed with work and cannot do more tests. Probably next week I'll try again.
Thanks for the idea of port mirroring /Wireshark. I'll try it!
Hi,I have to create other IP from other network (172.17.x.x), change my pc to that network, then delete 172.16.15.210 and then create the new ip 172.16.x.xHope that helps!That's what I did at least...
