About RobvdL

RobvdL · 01-04-2019

I've developed for a service in Python a validation check. It will validate if the service.vlan_id is already in use on multiple devices which are added to a list inside NSO. Because the network is a brownfield environment we want to have this check ...

RobvdL · 07-30-2018

I want to upgrade all NED's to NCS 4.7 but I'm stuck with the NX NED. When I set the symlink towards the correct NED directory, and after I did a make clean,make. I receive the following error when requesting to reload all packages inside NSO. The fo...

RobvdL · 07-24-2018

I've loaded a netsim with Junos, IOS-XE,NX and Fortios and I've added the devices in NSO v4.7 Also I've loaded the nso4.7 most recent neds. I fetched the keys without any problem. But now when I want to sync-from to all devices, only the Junos devi...

RobvdL · 05-28-2018

Hi experts,I'm trying to integrate ACI and ISE.To explain my current situation I'll go from access layer towards ACI.On the access layer a C3650 switch is configured with dot1x. 2 VM's are connected on dedicated switch ports, which can login into an ...

RobvdL · 01-03-2018

Hi, I've managed to deploy an AVE on an ESX host. Also I've configured the VMM domain and I see no errors. All VMM / Access policy's seems to be ok. The ESX host is directly connected to 2 ACI leafs, and is configured with a VPC profile with MAC pi...

RobvdL · 01-04-2019

I've found the solution. I need to check what value 'op' has: @Service.pre_modification def cb_pre_modification(self, tctx, op, kp, root, proplist): op == 0 when doing a dry-run or a commit. op == 1 when doing a re-deploy (reconcile), check-syn...

RobvdL · 07-24-2018

Yes you're right, thanks! I have now a successfully added all devices. Didn't realize it with all those other cli based NEDs. ncs-netsim list name=xxx netconf=12022 snmp=11022 ipc=5010 cli=10022 dir=/root/install/lab/netsim/xxxx/xxxxname=xxx netc...

RobvdL · 01-03-2018

Hi Manuel, The VPC is up, Show interface brief Ethernet VLAN Type Mode Status Reason Speed Port Interface Ch # ---------------------------...

Member Since	‎12-02-2017 01:39 AM
Date Last Visited	‎01-09-2019 12:05 AM
Posts	8
Total Helpful Votes Received	10

User Statistics

User Activity

Python check in service breaks service re-deploy and check-sync in NSO

Problem with NX NED: The prefix cli is defined in both http://tail-f.com/ned/cliparser and http://tail-f.com/ned/cliparser_v11

NSO sync-from Junos SSH subset not supported

ISE has failed to learned a new SXP mapping from APIC endpoint

Application Virtual Edge AVE not working

Re: Python check in service breaks service re-deploy and check-sync in NSO

Re: NSO sync-from Junos SSH subset not supported

Re: Application Virtual Edge AVE not working