pavlos82
Level 1
Level 1
Member since ‎01-08-2018
‎03-28-2018

User Statistics

  • 16 Posts
  • 2 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
1 Accepted Solution
10 Replies
5 Replies

User Activity

hi all, i have set up different vlans for my network , vlans on the same subnet mask is working perfectly within the subnet mask of 255.255.255.128 my only issue is inter vlan on different subnet mask, i have a new connection with a subnet 10.140.240...
i am stuck with a situation my network are as follows: i have different vlans set on my switch which is working great within the same subnet mask 255.255.255.128 but i now have new connection that i have create the vlan for that has a subnet mask of ...
Hi all, i recently installed and configure a new sg300 switch , all my vlans works fine and inter vlans.   vlan 1 is on 10.10.10.0 /25 vlan 20 is on 10.10.10.128 /25 vlan 30 is on 10.10.11.0 /25 vlan 40 is on 10.10.12.0 /25 vlan 15 is on 10.10.13.0 /...
Hi All,   i have a new cisco SG300-28PP  switch and i have configured the 1 Vlan so that is 2 from the default vlan 1 and now another vlan 20 , the vlans can ping the switch and their respective gateway , but i am unable to create communications betw...
Hi all,   I am having a tough time configuring a new Cisco SG300-28PP 28, it is default on L2 mode , i have tried to change the default ip 192.168.1.254 to a different subnet 10.10.10.254 to match my local LAN and for me to manage the switch on my LA...
Community Statistics
Member Since ‎01-08-2018 12:24 AM
Date Last Visited ‎03-28-2018 12:09 AM
Posts 16