About innovative_elephant

innovative_elephant · 11-27-2023

CSCwd08703 Removal of 'write mem' and 'copy run start' commands is not explainedCisco ISE 3.2 Patch 4Found one work around: Reload cmd to generate the save config prompt and then cancel the reload:reloadSave the current ADE-OS running configuration? ...

innovative_elephant · 05-14-2019

Is it recommended to remove old ISE patches? Cisco states that,"Patches are cumulative such that any patch version also includes all fixes delivered in the preceding patch versions." I've just installed Patch 8 for 2.4 and would like to remove the ol...

innovative_elephant · 09-15-2021

Hey Martin, I haven't yet found a way to do this for a group of APs on the 9800's because of the switch to tags, but here's how to disable 2.4Ghz for 1 AP from the cmd line: #ap name YOUR_AP_NAME dot11 24ghz shutdown (this will Admin down the interfa...

innovative_elephant · 04-29-2020

With ISE 2.4, we got an error message when trying to delete this cert (VeriSign Class 2 Secure Server CA - G3).Temporarily disabling all logging (Admin - System - Remote Logging Targets) allowed us to delete the cert even though none of our logging s...

innovative_elephant · 03-27-2020

For question #2 regarding the ",1" and ",12" see further discussion here: https://community.cisco.com/t5/other-network-architecture/bootvar-output/m-p/201692

innovative_elephant · 03-27-2020

Based on https://community.cisco.com/t5/switching/6509-e-boot-variable-sup-bootdisk-1/td-p/1152977 "The number displayed after the image name (for example, c6sup12-js-mz.121-13.E,12) indicates the number of times that the Cisco 7600 series router tri...

innovative_elephant · 02-07-2019

Had a similar issue running 6.2.3.4: Device Discovery stuck at 50% for many hours despite the device being long deleted. Neither an FMC console reload nor an FMC reload worked. TAC was able to find and kill the stuck process from the CLI. tl;dr: C...

Member Since	‎01-11-2018 01:11 PM
Date Last Visited
Posts	14
Total Helpful Votes Received	10

User Statistics

User Activity

CSCwd08703 Removal of 'write mem' and 'copy run start' cmds

ISE patches - Safe to remove old ones?

Re: 9800 - Disable specific interface 2.4 or 5 GHz for set of APs

Re: [ISE 2.3.7] How to renew the 'VeriSign Class 2 Secure Server CA - G3 in Trusted Certificates.

Re: 6509-E - BOOT variable = sup-bootdisk:,1;

Re: bootvar output

Re: Sensor - Discovery from the device is in progress