Gents,I have here a connected route, redistributed into OSPF, that is not making it into BGP. Any ideas as to why?R8#sh ip ospf database external 150.50.4.0 OSPF Router with ID (200.0.0.8) (Process ID 1) Type-5 AS External L...
Could someone tell me what I'm doing wrong here please?One side :Cat3550-1(config)#interface range fastEthernet 0/23 - 24Cat3550-1(config-if-range)#switchport trunk encapsulation dot1q Cat3550-1(config-if-range)#switchport mode trunkCat3550-1(config-...
Could someone please remind me of the difference between these two mechanisms and how I would be able to determine which I had to configure ?Cheers,Marcel
Reading up on WRR, and don't understand the final remark in this text:--Switch(config)# interface gigabitethernet0/1Switch(config-if)# wrr-queue random-detect max-threshold 1 50 100Switch(config-if)# wrr-queue random-detect max-threshold 2 70 100Swit...
According to this, I can configure a router to be an snmp manager. I turned it on and sent some snmp traps its way, but no logging is displayed. Is there any useful application for this then? Or am I doing something wrong?http://www.cisco.com/univerc...
Hi Sundar,yes, that particular configuration works. But, I did not see any spanningtree error messages. The ports get err-disabled. Could you explain a little more about why you think it would be a spanning-tree issue?Thanks,Marcel
Hi Edison,unfortunately, I don't have the equipment at my disposal right now. I'll try and post the output of the command you suggested shortly.Thanks,Marcel
Hi Jack,thanks for your suggestion, but it didn't quite solve my issue. This is a simple layer-2 bonded trunk connection. I mean, even with just:interface fas0/23channel-group 1 mode onswitchport mode trunk!interface fas0/24switchport mode trunkchann...
Hi anandanarayana,I tend to agree with you that the config is correct. I double and tripple checked it. Do you know why a port might get disabled if don't shut it, like you suggested?Cheers,Marcel
Hi Rick,thanks for your quick response. Clear and insightful as always. I now realize the error of my ways and you are spot on. The specific solution does not matter, it's understanding the mechanism which is what I was after. And you explained it pe...
