About mdepalmaevr

mdepalmaevr · 01-29-2018

We had an issue the other day where a port channel was blocked due to a "SPANTREE-2-RECV_PVID_ERR". We have a port channel (channel-group 42) configured on this switch with 8 ports. This port channel is configured as a trunk and those 8 ports are tie...

mdepalmaevr · 01-29-2018

I am just struggling to find a reason why a port channel that is connected to an ESXi host would have a spanning tree issue when hosts/vSwitches don't even participate in STP. The vSwtich drops STP frames also, so it isn't even possible for a VM to r...

mdepalmaevr · 01-29-2018

Yea @Reza Sharifi wrote: What is the purpose of this command? switchport access vlan 4 If vlan 4 supposed to be the native vlan than the command should be switchport trunk native vlan 4 HTH I actually need to find that out. I didn't understand the ...

mdepalmaevr · 01-29-2018

Here are relevant port channel and interface configs. Both are on the same switch and like I said the other end of both of these port channels is an ESXi host. Everything is consistent below. interface Port-channel41 description ESX03 switchport sw...

Member Since	‎01-29-2018 07:27 AM
Date Last Visited	‎02-05-2018 08:23 AM
Posts	4

User Statistics

User Activity

Spanning Tree PVID Inconsistency

Re: Spanning Tree PVID Inconsistency

Re: Spanning Tree PVID Inconsistency

Re: Spanning Tree PVID Inconsistency