About marcogarzetti

marcogarzetti · 11-23-2021

Hello, a customer has a RK+ with a Quad Cam, and would like to use the 2nd HDMI output to feed a USB video encoder connected to a Laptop. Is it possible to use this signal for the client on the laptop and keep the auto-tracking and control functional...

Events from Touch 10 user interfaces · 10-26-2020

Hello, I'm configuring a Cisco Touch 10 custom interface (made with the editor) that interacts with a control system connected to the endpoint. I subscribe to the events by using the command xfeedback register event/UserInterface/Extensions/Widget/ ...

marcogarzetti · 10-20-2020

Hello,which kind of traffic passes through the Ethernet Camera Control port on Cisco endpoints? I know that you can connect more than one camera by adding an ethernet switch in the middle, but a customer is asking to use his network to do this task a...

marcogarzetti · 01-31-2018

Good morning, we use a Crestron system to control (with an ssh connection) a Cisco SX80, software version ce 8.2.2 Final. The SX80 is new, and we are able to connect to the web interface and make settings, and the crestron module is correcly logging ...

marcogarzetti · 10-26-2020

Hello Enrico, thank you for your answer, it has been very helpful. Now is clear which kind of network the Cisco Endpoint generates on the Link-Local ports, and the useful possibilities that it creates (for example, the use of a control system on that...

marcogarzetti · 01-31-2018

It works! Thank you so much, Justin Ferello! Bye Marco Garzetti

Member Since	‎01-31-2018 12:45 AM
Date Last Visited	‎11-30-2021 08:42 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

Quad Cam HDMI output for video grabbing

Events from Touch 10 user interfaces

Ethernet on camera control port

SX80 - setup assistant without Touch

Re: Ethernet on camera control port

Re: SX80 - setup assistant without Touch