About jarnoldcop

jarnoldcop · 11-07-2018

Hello all, I am trying to install a new out-of-box Hyperflex cluster using installer 3.0.1e and UCSM v3.2.3h on four HXAF240c M5SX nodes. The configuration step seems to have gone OK so far, but it seems to be stalled at 'Configuring HX server', 'Con...

jarnoldcop · 11-08-2018

I can drop into the ESXi shell without having to issue connect host and can even log into the ESXi shell. I can do this from a workstation or from the platform installer VM. I have attached the hxinstaller.log.

jarnoldcop · 11-08-2018

Ensure the external-mgmt.pool IP addresses in UCSM are in the same subnet as the UCS Manager IP address They are on the same subnet. Verify connectivity between Platform Installer and server CIMC/KVM IP addresses (Ping/SSH) I can ping/SSH into any ...

jarnoldcop · 11-08-2018

The only thing in the FSM tab is the Turnup steps, which are successful on each server. No change in activity since around 17:30Z yesterday.

Member Since	‎02-01-2018 04:46 PM
Date Last Visited	‎06-24-2020 12:06 AM
Posts	4

User Statistics

User Activity

Hyperflex new cluster installation stalled

Re: Hyperflex new cluster installation stalled

Re: Hyperflex new cluster installation stalled

Re: Hyperflex new cluster installation stalled